קטלוג מוצרים

LAN cabling

By using its own room electronics (ESKS) compatible with many contemporary pushbuttons, an existing "simple" cabling can be used. Room electronics features a compact design and can be put in a standard flush-mounting box. NurseTab touch terminals are ideally connected through a direct IP data connection to the customer network (LAN). Because the modern care terminals can be supplied with electricity also through their data cables, the Power over Ethernet (PoE) an be used. If your data network currently forsees no supply with electricity of the connected data elements, this function can be easily upgraded later.

WLAN integration

NurseLog Server

Art. ERTS0001, ERTS0001-46 (Rack version)

NurseLog Server S

Art. ERTS0001-41, ERTS0001-47 (NurseLog Appliance-XS)

InfoTab - Function floor display

Art. ERTS0013-1

Basic licence for showing of calls and alarms on floor displays in the NurseCare system. No further user licences are necessary.

PoE Switch 10 ports

Art. ERTH0013-1

POE switch support 45 + 78-POE power supply. Design for 45 + 78 – powered equipment; if the device does not support, it may damage the device, for such equipment available support 45 + 78-POE plitter to separate the power transmitted from the cable and the data signal to power the Ethernet.

PoE Switch 18 ports

Art. ERTH0075

PoE Switch for connecting 16 external IP devices

Technical information:

● 10/100M, 24V

● Supports 16 PoE outputs with 2 uplink ports

● Adjustable voltage

● Automatic powering option

● Supports PoE IEEE 802.3af

● Supports extended function, max 250m distance

● Supports VLAN

● Adapter for internal powering

● Compliant with CE certification requirements

Dimensions:

320mm * 210mm * 44.5mm (L × W × H)

1.55kg

NurseTab display for nurse room

Art. ERTH0002, ERTH0002

NurseTab is a touch monitor for installation in service room. For a discrete communication it is additionally equipped with a telephone receiver.
It receives data from the NurseLog system via LAN or WLAN.
For cleaning during operation, a "cleaning module" is added.

NurseTab room terminal 8

Art. ERTH0001-5

Professional next generation room terminal NurseTab is the most modern "touch" room terminal for nurse call system. It includes NurseTab software and has possibility of remote access and programming. It can be mounted on wall or ceiling. Possibility of functionality: – presence acknowledgment and registering of staff – triggering and registering of assistance call for staff – marking and registering of night rounds of staff – review of active calls from nurse call system – registering care and nursing – establishing voice communication – establishing video conference – ordering meals – review of upcoming events and activities – managing, adding and review of past activities for individual resident / patient (for relatives) possibility of adding additional functionalities Technical specification: System

NurseTab NurseCall interface - ESKS

Art. ERTH0014

Room electronics for connection on a NurseTab touch terminal. Voltage supply via NurseTab touch terminal. Pushbuttons and room signal lights are connected to ESS Furthermore, input/output-based appliances or pushbuttons can be adapted to this room electronics.

NurseTab NurseCall Extention Interface - ESKSEB

Art. ERTH0014-1

Extention of ESKS board for 4 further call types, e.g:

Diagnostics call Bed 1
Diagnostics call Bed 2
Door contact
Window contact
Etc.

Description of each call type can be freely defined and thus used n a very flexible way.

NurseTab NurseCall IP Interface - IPSKS

Art. ERTH0015

Extention of ESKS board for 4 further call types, e.g:

Diagnostics call Bed 1
Diagnostics call Bed 2
Door contact
Window contact
Etc.

Description of each call type can be freely defined and thus used n a very flexible way.

NurseCare interface for connection of wired and BT call points - Relay

Art. ERTW0014 (BTGR/Rela)

NurseCare interface for connection of wired and wireless units. It’s used like a bridge between Nursetab terminal and other wired/BT NurseCare devices.

NurseCare interface for connection of wired and BT call points - Node

Art. ERTW0014-1 (BTGN/Node)

NurseCare interface for connection of wired and BT units.

Technical specification:

– Includes connection to room terminal – Receives signal from NurseCare units for staff protection – Receives signal from NurseCare nurse call system units – Includes location functionality – Numbers of Inputs: 6 – Numbers of outputs: 6 – Dimensions (W: 40mm / H: 40mm / D: 12mm) – Weight: 8g – Frequency: 2,4 GHz

– Transmission power 10 mW

– Operating temperature: +5°C – to +55°C

– Operating humidity: Up to 85%, non-condensing

– Compliant with CE certification requirements

– Compliant with DIN VDE 0834 certification requirements

NurseCare interface for connection of wired and wireless units with VLAN and BT connection

Art. ERTW0115 (IPBTG)

IPBTG is a room controller for installation in patient or resident room. It is connected to server via LAN or WLAN network and have possibility of connecting wired and BT units.

Technical specification:

– Receives signal from NurseCare units for staff protection – Receives signal from NurseCare nurse call system units – Includes location functionality – RJ45 POE port – LAN connectivity for transmitting signals to an IP network – Bluetooth 5.0 – Frequency: 2,4 GHz – Transmission power 10 mW – Numbers of Inputs for wired units: 6 – Numbers of outputs for wired units: 6 – Voltage: 24VDC/150mA or POE – Weight: 150g – Dimensions (W: 138mm / H: 30mm / D: 63mm) – Compliant with CE certification requirements

Wireless Wristband Transmitter with call functionality

Art. ERTW0016

Wireless wristband transmitter with red emergency call button. It can be worn around the neck with lanyard or wrist with wristband.

Technical specification:

emergency call

– display of location – battery alarm – Call button (red) – LED (red) for indicating call/reset – Waterproof membrane keypad for call and reset the emergency call

– Frequency band: 2.4GHz

– Power supply : 3V (battery CR2450)

– Size: 49x40x14 (without wrist band)

– Weight: 40g

– Operating temperature: +5°C – to +55°C

– Operating humidity: Up to 85%, non-condensing – Compliant with CE certification requirements–

-Compliant with DIN VDE 0834 certification requirements

Pre-push button simple

Art. ERTH0007

Simple handled pear button for triggering of calls.

Pre-push button socket

Art. ERTH0009

A socket for nurse call cord that allows you to call assistance. It has a LED witchlights up when you made a call.

Pull cord

Art. ERTH0010, ERTH0011-3

Pull cord toilets and wet rooms to trigger emergency call.
Option ERTH0011-3 includes green reset button to reset the call.
Installation in an industry-standard installation box.

Reset button

Art. ERTH0011

Reset button for installation in wet rooms in medical facilities.
Installation in an industry-standard installation box.

Call button

Art. ERTH0012

Call button for installation in medical facilities. Installation in an industry-standard installation box.

Call button / reset button with socket

Art. ERTH0012-1, ERTH011-2, ERTH0013-1

Call / reset button for installation in medical facilities. Installation in an industry-standard installation box. Room button with a RJ45 socket to connect pear-push buttons, wireless receivers, sensitive mates or similar end appliances.

Call and reset button

Art. ERTH0013

Call / reset button for installation in medical facilities. Installation in an industry-standard installation box. Room button for the entry room area. Includes buzzer for call forwardind.

Wireless call and reset button

Art. ERTW0013

Wireless call and reset/presence button for connection with room terminal and two options for power supply.

Wireless Call button with RJ45 socket

Art. ERTW0012-1

Wireless socket with call button for integration of pear push button at the patient’s bed for connection with room terminal and two options for power supply.

Wireless Call button

Art. ERTW0012-1

Wireless red call button for calling nursing staff.
Call button for indication of call in the room / toilet.

Wireless Presence / Reset button with pull cord

Art. ERTW0011-3

Wireless pull cord with presence/reset button for installation in wet rooms (toilet/bathroom) for connection with room terminal and two options for power supply.